|
The Dunsley stove range are high quality
stoves made in Holmfirth ,Yorkshire. The highlander and Yorkshire are the main models with a wide range of sizes,canopy and
boiler options.
For more details please call us on 01562 746910.
The Yorkshire stove is DEFRA certified to burn wood in a smokeless
or smoke control area !
Dunsley`Highlander 3` Stove(with canopy)
|
The
Highlander-3 has been designed with one door to open for re-fuelling and ash removal. The
Highlander-3 will take logs up to 200mm (8") long. The super air wash system has been designed tp keep the glass clean to
give a full view of the superb flame pattern, created as the flames rise to meet the incoming air, thus causing secondary
combustion to take place. A steel boiler or stainless steel boiler is also available. This takes the place of the rear firebrick
and can be installed by Dunsley if ordered with the stove, or can be fitted at a later date if required. see below for code
Number to use.
|
 |
|
| Dunsley Highlander 3 (with canopy) |

|
|
|
Highlander 3 Flat top £459 |
|
|
Highlander 3 with canopy £545 |
|
Dunsley`Highlander 5` Stove
|
The Highlander-5 has been developed
to increase the choice of the Householder, using the same superb burning technology as the Highlander-7. Same air wash
system. Same shaker gate system only slightly smaller, but can still take logs up to 280mm long. Same range of suitable fuel.
Same metallic black finish. Solid brass handles as standard, with black handles available on request. The Highlander-5
is different from the Highlander-& as follows - the overall size is smaller, this has enabled the design of the door to
be altered, so that on the Highlander-5 there is only one door to open for re-fuelling and removing ashes. This also means
that the safety precaution to prevent overfiring is automatically provided for.
HOW IT WORKS The Highlander-5
has two combustion controls exactly as the Highlander-7, to control the burning rate, with efficiencies of up to 70 percent.
The Highlander-5 is also available
with steel or Stainless Steel 2KW Boiler see below for code number.
|
|

|
|
| Dunsley Highlander 5 |

|
|
|
Highlander 5 Flat top £495 |
|
|
Highlander 5 with canopy £585 |
|
Dunsley`Highlander 5` Stove with log store
|
The Highlander-5 has been developed
to increase the choice of the Householder, using the same superb burning technology as the Highlander-7. Same air wash
system. Same shaker gate system only slightly smaller, but can still take logs up to 280mm long. Same range of suitable fuel.
Same metallic black finish. Solid brass handles as standard, with black handles available on request. The Highlander-5
is different from the Highlander-& as follows - the overall size is smaller, this has enabled the design of the door to
be altered, so that on the Highlander-5 there is only one door to open for re-fuelling and removing ashes. This also means
that the safety precaution to prevent overfiring is automatically provided for.
HOW IT WORKS The Highlander-5
has two combustion controls exactly as the Highlander-7, to control the burning rate, with efficiencies of up to 70 percent.
The Highlander-5 is also available
with steel or Stainless Steel 2KW Boiler see below for code number.
|
|

|
|
| Dunsley Highlander 5 |

|
|
|
Highlander 5 log store £610 |
|
Dunsley`Highlander 7` Stove
|
|
The Highlander-7 meets the
standards of the relevant British Standards for the whole of the UK. Also meets the requirements of the Scotland Building
Regulations 199 Part F. The Highlander-7 has been developed using the best burning technology to give you a stove with
a clean burn and high efficiency. The Super Air Wash System has been designed to keep the glass clean to give a full view
of the superb plane pattern created as the flames rise to meet the incoming air, this causes secondary combustion to take
place, resulting in clean burn with dancing flames. The highlander has also a superb shaker grate mechanism which
allows you to set the grate for efficient wood burning (large logs up to 360mm long) or any other solid fuel including peat,
coal, coal briquettes and of course all HETAS approved smokeless fuels. Finished in heat resistant metallic black
stove enamel paint and fitted with solid brass handles, black handles are available on request.
How It Works The
Highlander has two controls. The one above the main door controls the air wash system. By sliding the left to close,
right to open the air inlet holes, which then preheats the air before directing it down over the inside of the ceramic glass.
This keeps the products of combination away from the glass and also creates secondary combustion to increase efficiency and
reduce smoke emission from the flue. |
|
The control
below the main door is to adjust the amount of air required for easy lighting and rapid warm up, this also controls the flow
of air for varying fuels as required. The most suitable setting will quickly be found. Move the slide slowly to find the suitable
position. Using the correct rate of burning, efficiencies of up to 70% can be obtained.
-
An automatic door safety device
is fitted which prevents the bottom door opening before the top door is open. This prevents serious overtiring when removing
ashes from below the grate
-
The Highlander-7 is available
with steel or Stainless Steel 3KW Boiler. See below for code number.
-
The Highlander-7 and 5
are available with matching canopy on request, this can be removed or replaced at any time.
-
Both the Highlander-7
and 5 are also available with top or rear flue outlet. |
HIGHLANDER 7 WITH ATTACHED LOG STORE
Why choose a Highlander-7
with attached log store? It gives you somewhere to store the logs ready to re-fuel the stove. It makes it easier to
reach all the controls and remove the ash, which also makes it easier to use for the older and infirm.
|
|
| |
|
|
|
| Dunsley Highlander 5 |

|
|
|
Highlander 7 with canopy £695 |
|
|
Highlander 7 with log store £739 |
|
Dunsley`Highlander 8` Stove
|
What sets the Highlander-8 apart
from the 3, 5 and 7 are the two cast iron doors with large viewing windows, clean lines and a classic appearance.
A wide door opening and large fire bed capacity, enables you to load the fire box with good sized logs of up to 460mm or 18"
in length.
*NEW DEVELOPMENT: HIGHLANDER 8 STOVE WITH CENTRAL HEATING BOILER*
The Highlander-8 has
a superb air wash system designed to keep the glass clean by diverting a warm flow of air directly over the surface of the
glass. Each door has its own primary air controls. These control the amount of fuel being burnt and can also be closed down
for overnight burning of fossil fuels.
With a heat output
of 7 - 8 kW maximum the Highlander-8 will heat a medium to large room.
The grate mechanism
can be adjusted for burning wood or other solid fuels including: peat, coal and coal briquettes. There is a choice of boiler,
which is available in steel or stainless steel if required to connect into a direct hot water cylinder. This takes the place
of the rear fire brick and can be installed at the factory or at a later date if required. See below for product code numbers.
The Highlander-8
is available with black, brass or polished steel knobs and is finished in black metallic paint. |
| HIGHLANDER
8 WITH CANOPY FITTED

|
|
THE HIGHLANDER 8 WITH ATTACHED LOG STORE

Why choose a Highlander-8 with
attached log store? It gives you somewhere to store the logs ready to re-fuel the stove. It makes it easier to reach
all the controls and remove the ash, which also makes it easier to use for the older and infirm. |
|

|
|
|
| Dunsley Highlander 8 |

|
|
|
Highlander 8 with canopy £835 |
|
|
Highlander 8 with log store £895 |
|
|
Highlander 8 Double sided £1025 |
|
Dunsley`Highlander 10` Stove
|
|
The new Highlander-10 stove
is a wide version of the popular Highlander 8 model, with the same burning control system but nearly 100mm wider than the
8 and with a fuel box area to take logs up to 550mm long, this makes the Highlander-10 more suitable for larger rooms
The Highlander-10
has a superb air wash system designed to keep the glass clean by diverting a warm flow of air directly over the surface of
the glass. Each door has its own primary air controls. These control the amount of fuel being burnt and can also be closed
down for overnight burning of fossil fuels.
With a heat output
of 9 - 10 kW maximum the Highlander-10 will easily heat larger rooms.
The grate mechanism
can be adjusted for burning wood or other solid fuels including: peat, coal and coal briquettes. There is a choice of boiler,
which is available in steel or stainless steel if required to connect into a direct hot water cylinder. This takes the place
of the rear fire brick and can be installed at the factory or at a later date if required. See below for product code numbers.
The Highlander-10
is available with black, brass or polished steel knobs and is finished in black metallic paint. |
|
|
|

|
|

| |
|
|
|
| Dunsley Highlander 5 |

|
|
|
Emissions from the Yorkshire are so low that it very easily complies
with the clean air act [see the
graph on the technical spec page].
Independent laboratory tests show efficiencies of over 70% on a whole range
of fuels including wood. All this has been achieved on the Yorkshire
without using catalyst combusters, which are very expensive to replace and can easily
become damaged if coal or impure wood is burnt. Cleanburning is also better.
|
| Dunsley Yorkshire |

|
|
|
Yorkshire multifuel £1095 |
|
|
Yorkshire wood burning stove £985 |
|
|
Yorkshire multi fuel with boiler £1535 |
|
|